Port Machinery LED Work Light Application Solution
E210044 / E210044-1 / E210044M / E210044M-1 Series
Applications: ship-to-shore crane (STS) · yard crane (RTG/RMG) · portal crane · harbor tug

E210044 Series Port Machinery Work Light (56000 lm · IP67/IP69K · 5grms vibration resistance · 720h salt spray)
Port terminals run 24-hour continuous operations, and night-time lighting on ship-to-shore cranes, yard cranes, portal cranes and other port machinery directly affects handling efficiency and operational safety. Conventional high-pressure sodium and metal halide lamps generally suffer from high energy consumption, rapid lumen depreciation, short life (about 8000 hours) and difficult maintenance at height. This solution uses the E210044 series high-power LED port machinery work light to deliver an integrated high-brightness, long-throw, low-maintenance solution for crane-mounted lighting in port areas.
· Work surface illuminance: night-time horizontal illuminance at the quay edge and container yard ≥ 20 lx (verified at design stage against GB 50034 and relevant port lighting standards);
· Mechanical adaptability: the luminaires travel continuously with the port machinery, so they must withstand vibration (5grms), marine salt spray (720h), rain and washdown (IP67/IP69K) and a temperature range of -40℃~+50℃;
· Light quality: both narrow-beam long-throw projection (spreader / ship deck) and wide-beam broad coverage (container yard / hatch), with dual color temperature options and controlled glare and port light pollution;
· Energy saving: replaces 1000W-class metal halide lamps with a fixture power consumption of only 400W, and offers 50%/80%/100% three-step smart dimming.
| Model | Color temperature | Beam angle | Recommended applications |
E210044 | 2700K warm white | 20° narrow beam | Long-throw projection from STS crane girders; rainy and foggy port areas |
E210044-1 | 5700K cool white | 20° narrow beam | Long-throw projection from STS crane girders; high-clarity operations |
E210044M | 2700K warm white | 60° wide beam | Yard cranes / container yards and wide-area lighting over hatch openings |
E210044M-1 | 5700K cool white | 60° wide beam | Yard cranes / container yards and wide-area lighting over hatch openings |
Common key parameters: total LED power 1180W / luminaire power consumption 400W (intelligent thermal control) | theoretical luminous flux 59000 lm, actual 56000 lm | voltage 120–227V AC | IP rating IP67 / IP69K | vibration resistance 5grms | salt spray 720h | operating temperature -40℃~+50℃ | aluminum alloy housing + 304 stainless steel bracket | approx. 14kg | cable length customizable.
EMC performance: electrostatic discharge IEC61000-4-2 (contact ±8kV / air ±15kV); radiated immunity 4-3 10V/m; burst 4-4 ±2kV; surge 4-5 (L-N ±6kV, L/N-PE +10kV); conducted immunity 4-6 10V/m.
· Ship-to-shore crane (STS): luminaires mounted on the lower flange of the girder / boom, spaced 8~12m along the girder, with the optical axis aimed at the spreader working area;
· Yard crane (RTG/RMG): mounted on the cross beam or the underside of the trolley frame, covering the container stacking area and truck lanes;
· Portal crane: mounted on the jib / slewing platform, covering hatch openings and the quay surface;
· Power supply: taken from the 220V auxiliary power circuit of the port equipment (120–227V AC wide-voltage input); cable length customized per site; brackets made to match the equipment drawings.
Peak beam intensity calculated from the actual luminous flux of 56000 lm: 20° beam I ≈ 5.9×10⁵ cd, 60° beam I ≈ 6.7×10⁴ cd. Working-surface illuminance is estimated as E = I/d² (mounting height taken as 50m for typical port equipment):
· STS spreader working surface (about 50m below the rail): approx. 200 lx, far above the 20 lx working requirement; still approx. 58 lx at 100m;
· Yard crane with 60° wide beam: approx. 50 lx at 36m and approx. 20 lx at 58m, covering the full spreader slewing range;
· Three-step dimming (50%/80%/100%) can be adjusted flexibly to the operating cycle and port light-pollution requirements.

Figure 1 STS night operation simulation (E210044-1 ×2, 5700K / 20°)

Figure 2 Top-view illuminance coverage simulation at the quay edge (20° ×2, iso-illuminance contours marked)

Figure 3 Comparison of dual color temperature options for yard cranes (E210044M / E210044M-1, 60°)

Figure 4 Illuminance vs. distance decay curves for 20° / 60° beams
· One 400W luminaire replaces a 1000W metal halide lamp: based on 8 luminaires per STS crane, 10 hours per night and 330 operating days per year, annual power savings of approx. 15800 kWh, a 60% saving rate, and annual CO₂ reduction of approx. 9 tons (estimated at 0.57 kg/kWh);
· LED lifespan ≥ 50000h, more than 6 times that of metal halide lamps (approx. 8000h), greatly reducing high-altitude lamp replacement work and equipment downtime;
· Intelligent thermal control plus three-step dimming further reduce overall energy consumption and lumen depreciation.
Provided per project: illuminance simulation report, mounting bracket drawings, on-site beam adjustment and measured illuminance acceptance; warranty period and commercial terms to be negotiated separately.