This solution delivers a customized marine spotlight system for core scenarios such as deck operations, cargo hold lighting, berthing and cargo handling at the terminal, equipment maintenance and shipside local lighting. The products strictly follow CB/T 3852.1-2008 Marine lighting fixtures - Types, parameters and main dimensions - Part 1: Interior and exterior lighting fixtures, **CB/T 4526-2024 Technical requirements for LED lighting equipment on ships** and other industry standards, and are built for harsh marine conditions including high salt spray, strong vibration and extreme temperature differences. Centered on "precise spotlighting, high protection and long service life", the system safeguards the safety, accuracy and efficiency of lighting in ship working areas and supports compliant, intelligent upgrading of vessel operations across all scenarios.
II. Core Product Solutions
(I) Core Product Parameters (for the marine spotlight shown in the image)
Table
| Parameter | Value | Compliance basis |
| IP rating | IP67 (dust-proof, resistant to heavy salt spray and deep water immersion) | CB/T 3852.1-2008 |
| Light source type | High-power LED (optional COB integrated light source) | CB/T 4526-2024 |
| Rated power | 00W/150W/200W (customized) | High-power marine lighting standard |
| Effective beam distance | 300m -1000m (matched to power and application) | Local lighting requirements for ships |
| Power supply | AC220V/50Hz, DC24V (compatible with ship power systems) | General standard for marine electrical systems |
| Rotation / adjustment range | Horizontal 360°, pitch ±45° (manual or electric, optional) | Multi-angle lighting requirements |
| Temperature resistance range | -40℃~+50℃ | Extreme environment requirements of polar / tropical waters |
| Vibration resistance grade | Complies with GB/T 2423.10 (classification society acceptance standard) | Marine machinery vibration compatibility |
| Corrosion protection class | C5-M (high salt spray corrosion class for marine environments) | ISO 12944-5 |
(II) Core Product Features
1. Precise Spotlighting, Scenario Fit
An integrated design of aspherical lens and COB light source delivers a highly concentrated beam: the 15° narrow angle provides precise local lighting at 50-100m (for equipment maintenance and shipside operations), while the 30°/60° wide angles cover large areas such as cargo holds and decks for local fill light, meeting the lighting precision required by different scenarios.
2. Extreme Environmental Resistance
The housing combines die-cast aluminum, electrostatic powder coating and stainless steel fasteners, with salt spray corrosion resistance of 8000h without rust; it prevents high-temperature lumen depreciation and keeps lighting stable.
3. Multi-Mode Control and Intelligent Protection
Three control methods are supported: manual knob adjustment, wireless remote control and linkage with the ship control console, allowing brightness and angle to be adjusted remotely. Built-in four-fold protection against overload, short circuit, overheating and surge adapts to ship power fluctuations; in the event of a fault, power is cut automatically and an alarm is triggered, eliminating electrical safety hazards.
4. Maintenance
A quick-release modular design lets the light source, heat dissipation and driver modules be replaced independently without dismantling the whole fixture, improving maintenance efficiency by 70%. The LED light source has a lifespan of ≥80,000 hours, 15 times that of traditional halogen spotlights, greatly reducing replacement costs.
III. Full Project Implementation Process
(I) Upfront Requirements Research and Solution Customization
1. Scenario and Requirement Matching
o Define lighting points by vessel type (bulk carrier, container ship, fishing vessel, research vessel, port workboat): cargo hatch, deck working area, shipside, terminal loading platform, lifeboat deck, etc.
o Select models by operational need: 15° narrow-angle spotlights for equipment maintenance, 60° wide-angle spotlights for cargo holds, and high-brightness 100W+ spotlights for berthing at the terminal.
2. Compliance and Compatibility Confirmation
Align in parallel with classification society (CCS/ABS/LR, etc.) certification requirements, vessel grid capacity and emergency lighting interlock rules, ensuring the solution meets vessel classification and statutory survey requirements.
B. Installation and Deployment
1. Installation planning
o Mounting position: preferably directly above or to the side of the work area to eliminate lighting dead zones; mounting height ≥3m to avoid impact from vessel pitching and direct seawater wash.
o Fixing requirements: secure with stainless steel expansion bolts + anti-vibration rubber pads, rated for Beaufort 12 wind and high-frequency vibration on board; apply anti-corrosion and anti-rust treatment (zinc-rich epoxy paint + anti-corrosion sealant) at the weld joints between the mounting bracket and the hull.
2. Electrical wiring requirements
o Use marine flame-retardant waterproof cable (CEF/CEFR series), routed away from power cables and strong electromagnetic equipment to avoid signal interference; use conduit + waterproof sleeve for double protection, with IP67 sealing at all connections.
o Route main power and emergency power independently, with dedicated marine residual current devices and air circuit breakers for safe, redundant power supply.
3. Commissioning and acceptance
o Functional commissioning: verify beam angle adjustment accuracy (error ≤0.5°), dimming / remote control / interlock functions, and protection device trip sensitivity;
o Performance testing: measure illuminance at each point with an illuminance meter to ensure values ≥ those specified in CB/T 3852.1-2008;
o Compliant handover: provide certificates of conformity, classification society certification, test reports and as-built installation documents to complete project acceptance.
C. Full Lifecycle Operation and Maintenance Support
1. Routine maintenance system
o Weekly check: inspect seals, fasteners and lens cleanliness; remove salt spray and dirt;
o Monthly check: test lighting functions and angle adjustment accuracy; tighten loose components;
o Annual check: fully inspect the heat dissipation system, driver modules and electrical protection devices; replace aged seals and wear parts.
2. Upgrade and iteration services
Smart control system upgrades are supported. The lights can connect to a vessel IoT platform for lighting energy statistics, remote fault alerts and real-time equipment status monitoring; they adapt to vessel grid upgrades with flexible power supply specifications, extending system service life.
IV. Project Value and Assurance
A. Core Project Value
1. Safety enhancement
Precise local lighting eliminates blind spots in the work area and reduces the risk of accidents during deck operations, cargo handling and similar scenarios; multiple smart protection functions safeguard the vessel grid and equipment in line with maritime safety regulations.
2. Lower cost, higher efficiency
The LED light source saves more than 60% energy, and an 80,000-hour lifespan reduces replacement frequency; modular design lowers maintenance costs. One fixture family serves multiple on-board lighting scenarios and replaces several types of conventional luminaires.
3. Hassle-free compliance
The full product range holds authoritative certifications including CCS, ISO and CE, strictly follows international maritime and marine industry standards, and meets the full classification and survey process for vessels at home and abroad.
B. Service and Warranty Assurance
1. Customization support
Customization is available for power, beam angle, control method and mounting dimensions to meet the special lighting needs of specialized vessels (research ships, fishing vessels, naval vessels).
2. Warranty assurance
3-year warranty on the complete fixture and 5-year warranty on core components (light source, driver, heat dissipation system), with lifetime technical support and spare parts supply.