About Us
About Us

Home/About Us
Company Profile
Since 2024
Company Profile

SUNLIT optical design adheres strictly to the COLREGs (International Regulations for Preventing Collisions at Sea) requirements for navigation light color, visibility distance, and horizontal and vertical arcs, ensuring that the chromaticity coordinates of every navigation light fully meet the chromaticity region boundaries specified by CIE, the International Commission on Illumination, with red (port), green (starboard), white (masthead/stern) and yellow (towing) all rendered precisely.

Based on the IEC 60945 system, SUNLIT can provide test reports for all products, including but not limited to reports from authoritative third-party laboratories such as TUV, AMECA and SGS.
AQL component sampling inspection
AQL component sampling inspection
Rubber pressure test
Hipot test
Stainless steel chemical check
Stainless steel chemical check
Cable pull test
Cable pull test
Salt spray test
Salt spray test
High/low temperature cycling test
High/low temperature cycling test
Cross-cut test
Cross-cut test
Drop ball test
Drop ball test
Appearance & dimension check
Appearance & dimension check
AOI automatic inspection
AOI automatic inspection
PCBA functional test
PCBA functional test
Inspection fixtures and jigs
Inspection fixtures and jigs
Circuit test
Circuit test
Temperature test
Temperature test
Aging test
Aging test
Waterproof test IP68/IP69K
Waterproof test IP68/IP69K
Vibration Test
Vibration Test
Dust Test, IP6K
Dust Test, IP6K
Integrating Sphere Test
Integrating Sphere Test
Beam Pattern Test
Beam Pattern Test
Hipot Test
Hipot Test
EMC Test
EMC Test
Finished-Product Test
Finished-Product Test
Finished-Product Storage
Finished-Product Storage
R&D
i. Design & Development | 2D Drawing Custom Project Kickoff
We take in your custom requirements — boat light function concept, mounting dimensions, lighting parameters, and vessel operating conditions. Our engineers start with a feasibility assessment and begin product development from 2D structural drawings. We can produce a complete set of drawings covering housing structure, optical layout, mounting cutouts, and wiring ports, and support custom drafting for round work lights, deck searchlights, yacht navigation lights, and many other fixture types, turning your product idea into an accurate, buildable design.
iii. Stable Manufacturing | Complete Custom Packages for Your Brand
Once the sample passes validation, standardized mass production begins. We offer exclusive brand customization: based on your brand positioning, we design the housing appearance, light source parameters, outer packaging, and complete accessory kits, delivering a full turnkey boat light solution for yachts, fishing boats, merchant vessels, and workboats.
Cable tension
ii. Engineering Validation | PFM Process Control + DFMEA Risk Analysis
1. PFM Precision Process Control Backed by refined production process control standards, we test and calibrate each boat light for optical brightness, waterproof rating, shock resistance, and corrosion resistance, safeguarding lighting performance in harsh marine environments and holding samples to strict quality standards.
2. DFMEA Failure Mode Risk Analysis For the harsh conditions boat lights face at sea — humidity, salt spray, and shock — we anticipate failure risks in advance and screen circuits, housings, and light sources for hidden issues. We have completed custom development projects for numerous marine lighting brands in Europe, the US, and Australia, and bring long-term ODM partnership experience.
iv. Reliable Delivery | End-to-End Project Execution
Mature supply chain and quality control processes: after batch inspection of multiple boat light models, we complete product packing, quality re-inspection, and export packaging. Drawing on proven overseas supply experience, we deliver lights reliably and provide long-term, stable contract manufacturing for marine lighting brands overseas.
Factory Tour
Production Process
Lead-Free Hot Air Reflow
8-zone reflow soldering with upper and lower heating zones, an ideal temperature profile, better solder paste, and a high-gloss finish.
AOI (Automated Optical Inspection)
AOI (Automated Optical Inspection)
The AOI automated optical inspection machine finds defective solder joints quickly and ensures good quality on every PCB.
Ultrasonic welding machine
Ultrasonic welding machine
High-frequency signals are converted into high-frequency mechanical vibration, raising the interface temperature of the product base and cover to melting point so they bond firmly. This achieves seamless welding and a high level of waterproofing.
Integrating sphere test
Integrating Sphere Test:
Tests LED performance parameters such as flux (LM), color temperature, wavelength, and luminous efficiency.
Dust Test
Dust Test
Reference standard: ISO 20653-2013 Dust: circulation of Arizona dust 6S dust mixture; 15-minute rest. 20 such cycles are run. During the test, the sample is continuously pumped under negative pressure.
Fully Automatic Printer
Fully Automatic Printer
Fully automatic solder paste printing, accurate to 0.02mm, with even solder spreading.
SMT (pick-and-place)
SMT (pick-and-place)
High-speed SMT equipment for fully automated surface mounting and soldering
Cross-cut test ISO 2409-2013
Cross-Cut Test
Evaluates how well the paint coating resists separation from the substrate when a right-angle lattice pattern is cut through the coating to the base layer.
Waterproof Test
Waterproof Test
Before delivery, every light must pass IP66, IP67, IP68, or IP6K9K waterproof testing. We use two different methods to test the waterproof rating. 1) High-pressure water jet sprayed onto the light: 2) Testing the submerged light with 0.03MPa air under negative pressure in the water tank;
If you have any questions, please contact Contact Us
Earning trust through quality, achieving shared success through service. We look forward to broader and deeper cooperation with you.