Lead-Free Hot Air Reflow
8-zone reflow soldering with upper and lower heating zones, an ideal temperature profile, better solder paste, and a high-gloss finish.
AOI (Automated Optical Inspection)
The AOI automated optical inspection machine finds defective solder joints
quickly and ensures good quality on every PCB.
Ultrasonic welding machine
High-frequency signals are converted into high-frequency mechanical vibration, raising the interface temperature of the product base and cover to melting point so they bond firmly. This achieves seamless welding and a high level of waterproofing.
Integrating Sphere Test:
Tests LED performance parameters such as flux (LM), color temperature, wavelength, and luminous efficiency.
Dust Test
Reference standard: ISO 20653-2013
Dust: circulation of Arizona dust 6S dust mixture;
15-minute rest. 20 such cycles are run.
During the test, the sample is continuously pumped under negative pressure.
Fully Automatic Printer
Fully automatic solder paste printing, accurate to 0.02mm, with even solder spreading.
SMT (pick-and-place)
High-speed SMT equipment for fully automated surface mounting and soldering
Cross-Cut Test
Evaluates how well the paint coating resists separation from the substrate when a right-angle lattice pattern is cut through the coating to the base layer.
Waterproof Test
Before delivery, every light must pass IP66, IP67, IP68, or IP6K9K waterproof testing. We use two different methods to test the waterproof rating.
1) High-pressure water jet sprayed onto the light:
2) Testing the submerged light with 0.03MPa air
under negative pressure in the water tank;